About PunctureSafe UK...

Welcome from the Managing Director

Thank you for your interest in our innovative product. During the early years when we were developing PunctureSafe, our research revealed that there was a need for a good quality puncture prevention treatment for very high speed vehicles that would provide a permanent seal and would last for the lifetime of the tyre, but at that time there was no such product available. We believed that the sealants on the market were only suitable for slow moving construction industry vehicles and large trucks because large wheeled, low speed vehicles do not generate heat, stress or centrifugal forces that will eventually cause most tyre sealants to break down or pull apart. We looked worldwide at the tyre sealant industry that had developed over the years and after exhaustive testing we found that the large majority of tyre sealants available did not work satisfactorily, indeed many caused other problems inside the tyre. We did not find a tyre sealant with the unique abilities and attributes that we currently find in PunctureSafe, but more alarmingly we discovered that many tyre sealants contained Ethylene Glycol as an anti-freeze which is lethal to humans and animals. Many tyre sealant manufacturers worldwide are still using old technology and out-dated polymers developed many years ago, still mixing their ingredients in a food industry mixer like a giant yogurt recipe without the application of heat. It is our opinion that a quality permanent puncture prevention treatment cannot be made without the application of heat and the principles of chemistry, for in order to incorporate all the attributes necessary for a good product, we believe the ingredients cannot be mixed cold.


I had worked extensively in the laboratory for several years with the many specialty polymers that were being developed for industry. As such my experience with heat resistant polymers led me to believe that we could overcome the difficult task ahead and develop a high performance permanent puncture prevention treatment that would be both fit for purpose and able to survive the hostile environment inside a high speed tyre. We are a responsible company, conscious of health, safety and the welfare of all things living so therefore our puncture prevention would also have to be formulated with a non toxic anti-freeze that would be just as effective as a Glycol. After a decade of development and exhaustive testing we successfully managed to achieve all our goals. With 21st century polymers, modified by ourselves from selectively chosen raw materials and cutting edge chemistry, in a proprietary process developed exclusively in the UK, we now manufacture a premier high performance high speed permanent puncture prevention treatment. The most challenging part of formulating for high speed vehicles was to incorporate the ability of the sealant to thinly cover more of the the inner tyre "with increasing speed" instead of being driven by centrifugal forces in a very narrow band down the centre of the inner tread area. Using "chemical nanotechnology", we invented a polymer gel that we trademarked "FlexxaGel™" that had an extraordinary ability to cling to rubber under all conditions, even at speeds of 250 kph. Incorporation of FlexxaGel™ into the process also gave the finished sealant incredible elastic properties enabling it to stretch and flex at the higher speeds. FlexxaGel™ is exclusively manufactured at our Devon facility and is one of our most closely guarded trade secrets.


Our proprietary formulation has evolved far beyond that which is commonly known as a tyre sealant - PunctureSafe is a tyre safety system that is outstanding at permanently sealing punctures and a true tyre life extender. The complexity of the formula, the proprietary polymers processed in-house and the high tech chemically engineered processing equipment required for manufacturing such a product means that no other company has yet managed to duplicate, or get close to what we have accomplished. With the knowledge achieved developing our high speed product we have managed to achieve unbelievable success with our low speed extra heavy duty grade which is outperforming everything else by huge margins. We manufacture 4 different grades which are packaged comprehensively for all markets. It has been the combination of an excellent product, consumer friendly packaging, informative point of sale material, and full back-up support and equipment that has given us so much success.


Following our phenomenal success in the UK we are now receiving numerous enquiries for PunctureSafe from all around the world and are now in the process of appointing overseas Master Licence holders.  In only 2 years since we decided to go global PunctureSafe is now represented extensively worldwide.  Prior to this we refused to supply overseas so as we could focus totally on our UK market.  We get enquiries daily for distribution of this unique product from all parts of the world and from the remotest of locations such as Kathmandu, Nepal (next to Tibet) in the Himalayas!


Any company or individual in a country where PunctureSafe is not established is invited to submit a proposal to join the PunctureSafe team as an International Distributor.  We do not charge a fee for this licence, but we do require that Master Licence holders have an excellent business capability and track record, with good finances in order to successfully build a solid PunctureSafe business.  We are interested in sharing our knowledge and expertise with enthusiastic people who can duplicate our success in their own country.  We can get you up and running quickly because we have all the equipment and master software which has taken us many years to build.  If you can meet all our expectations please e-mail or call for an application form.


As head of Research & Development and with very extensive knowledge of advanced polymer chemistry, I will ensure PunctureSafe remains the world’s “number one” high performance permanent puncture prevention treatment for high and low speed vehicles well into the future.








Company Profile

PunctureSafe Office image
PunctureSafe Office image

The PunctureSafe UK administration team at our Exeter office (above).

PunctureSafe Dispatch image
PunctureSafe Victoria image

Our factory/distribution warehouse (above) dispatches UK and international orders.
Victoria (above left) one of our many overseas Master Licence holders on one of her many visits to the UK.

We welcome visitors to our factory/office complex at Exeter.

PunctureSafe Support Team image
We have the equipment to give full back-up support no matter what the request may be

Polymer Chemistry

PunctureSafe Lab image
PunctureSafe Lab image

The PunctureSafe UK research and development team (above) who developed PunctureSafe, have advanced knowledge of polymer chemistry in their individual fields of expertise which helped make PunctureSafe a truly unique product.

PunctureSafe Readings image


PunctureSafe image 06

Our manufacturing process plant (above) comprises up to date equipment that produces batch to batch consistency.

Assembling the manufacturing facility with process plant at our new premises


PunctureSafe Factory image


September 2013 - our new process tank (below) gives us the capability to manufacture enough PunctureSafe in one batch to fill a 20' shipping container (720 x 20 litre drums).

Large order sales are accelerating so the new process vessel is now required.


PunctureSafe image 04

Contact PunctureSafe UK...



Our normal hours are:-  9 am to 5pm Monday to Friday

Enquiries & Sales: call Wendy on 01395 233951

Line busy? We have 8 lines at our Exeter office. Call:

International and UK distributor enquiries:- Alison on 01395 233742, Sandra on 01395 232436,

All other enquiries:- Rebecca on 01395 232209, Nicola on 01395 239881, Mike on 01395 239227, Amy on 01395 239184

Dispatch:- Ashley - 01395 239227